[Nut-upsuser] APC Ups with auto port fails to shut down
clepple at gmail.com
Mon Jan 12 23:51:06 UTC 2009
On Jan 12, 2009, at 6:15 PM, Alberto Rocha wrote:
> I have set the driver name to newhidups and the port to auto.
What version of NUT are you using?
> The status of the UPS is connected but it does not shutdown when
> the FINALDELAY value in the upsmon.conf is reached.
> If I change the port value in the ups.conf from auto to a specific
> port value, it works fine.
> Any ideas?
> If I leave the specific port value, when it shuts down, this value
> changes and get reassigned, which is not the desired solution.
Would you please post your ups.conf file?
Also, how are you setting permissions on the USB device node? (/proc/
bus/usb/*/* or /dev/bus/usb/*/*)
clepple at gmail
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser