[Nut-upsuser] HP/Compaq T700H UPS cable pinout

[Mathew McBride]

On 14/1/09 2:43 AM, Kjell Claesson wrote:
> What driver do you use , upscode2 or bcmxcp ?
>
> Can you send the outupt of
> upsc<ups>
>
I'm using bcmxcp for this particular (XR series) model.
Here is a typical upsc list:
ambient.temperature: 42
battery.charge: 95
battery.runtime: 9000
battery.voltage: 26.13
driver.name: bcmxcp
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS1
driver.version: 2.4.0-pre1
driver.version.internal: 0.18
input.frequency: 50.34
input.voltage: 245
output.current:  0.7
output.frequency: 50.34
output.phases: 1
output.voltage: 217
output.voltage.nominal: 230
ups.firmware: Inve:04.01
ups.load:   0.6
ups.model: T700h INT'L         700VA
ups.power.nominal: 700
ups.serial: UU064A0283
ups.status: TRIM

- Mathew