[Nut-upsuser] Driver for UPS Eaton 9130

Kjell Claesson kjell.claesson at epost.tidanet.se
Mon Mar 16 00:15:43 UTC 2009

söndag 15 mars 2009 23:57:18 skrev  Attila Csontos:
> Hi Kjel,
> I was trying both, but I got message "unknow UPS" (or similar like
> this).  Maybe nut
> does not support this model UPS till now.

This sounds strange. Maybe Arnaud can answer this.
B.t.w. Have you checked that the nut driver have right
to the com port?

If you have a ups.conf like this:

        driver = bcmxcp
        port = /dev/ttyS0
        baud_rate = 9600
        shutdown_delay = 10
        desc = "Web server"

you may try to run the driver like this:

/path/to/bcmxcp -DD -a pw9130 -u root

(Stop by ctrl-c)
Then we know if there is a right's problem.
And you also get some debug info.


More information about the Nut-upsuser mailing list