[Nut-upsuser] Cyberpower Value 600E UPS (USB) is not recognized by usbhid-ups under FreeBSD 7.2

[forsite]

Dear Arjen,

Many thanks for your prompt reply.

> This vendorid:productid combination is supported by nut-2.4.1 out of the
> box, so most likely, it is a permissions problem. Try running
>
>    ./usbhid-ups -u root -DD -a CyberPower

Actually, I have tried this also (I should have mentioned this in my
previous posting).  Moreover, I have set permissions to USB devices to
make them accessible for the uucp user, so I hope the permissions
should be ok.

[root at substance /usr/local/libexec/nut]# ./usbhid-ups -u root -DD -a CyberPower
Network UPS Tools - Generic HID driver 0.34 (2.4.1)
USB communication driver 0.31
debug level is '2'
upsdrv_initups...
No appropriate HID device found
No matching HID UPS found

Could it be that FreeBSD recognizes my CyberPower device a little bit
different than any Linux machine (say, the device signature as
recognized by USB driver is different) - so a small patch of the nut
source code may improve the situation?

Can I debug nut or libusb further to see what is going on inside?

Thanks a lot,
forsite