[Nut-upsuser] amacrox ap1000 problems

Arjen de Korte nut+users at de-korte.org
Thu Apr 8 13:06:33 UTC 2010


Citeren Dimitri Ognibene <dimitri.ognibene op gmail.com>:

> the output of   sudo /lib/nut/blazer_usb -u root -DDD -a ap1000 is
>
> Checking device (0665/5161) (008/004)
> - VendorID: 0665
> - ProductID: 5161
> - Manufacturer: Cypress Semiconductor
> - Product: USB to Serial
> - Serial Number: unknown
> - Bus: 008
> Trying to match device
> Device matches
> Trying megatec protocol...
> send: Q1
> read: Q1
> blazer_status: short reply
> Status read 1 failed
> send: Q1
> read: Q1
> blazer_status: short reply
> Status read 2 failed
> send: Q1
> read: Q1
> blazer_status: short reply
> Status read 3 failed
> Trying mustek protocol...
> send: QS
> read: (231.6 231.6 231.6 024 49.9 27.0 --.- 00001001
> blazer_status: non numerical value [--.-]
> Status read in 1 tries
> Supported UPS detected with mustek protocol
> send: F
> read: #220.0 005 24.00 50.0
> Ratings read in 1 tries
> send: I
> read: I
> blazer_vendor: short reply
> Vendor information read 1 failed
> send: I
> read: I
> blazer_vendor: short reply
> Vendor information read 2 failed
> send: I
> read: I
> blazer_vendor: short reply
> Vendor information read 3 failed
> Vendor information unavailable
> Battery runtime will not be calculated (runtimecal not set)
> send: QS
> read: (231.6 231.6 231.6 023 49.9 27.0 --.- 00001001
> blazer_status: non numerical value [--.-]

What is your question? As far as I can see, this device is supported  
by the blazer_usb driver. It won't provide temperature readings and  
supplies vendor information, but other than that, the values it  
reports are reasonable. If you need any more help, be a little more  
specific.

Best regards, Arjen
-- 
Please keep list traffic on the list




More information about the Nut-upsuser mailing list