[Nut-upsuser] Liebert powersure psp

[Arnaud Quette]

2010/4/24 Charles Lepple <clepple at gmail.com>

> On Apr 23, 2010, at 4:46 PM, Steve . wrote:
>
>  i changed ups.conf from:
>> driver = usbhid-ups
>> to
>> driver = usbhid-ups -x productid=0003
>> I recieve the same message as above. Perhaps i'm making an obvious mistake
>> somewhere?
>>
>
> The message refers to the command line you would use to start the driver
> manually. If you are using upsdrvctl, you don't need the "-x": just put
> "productid=0003" on the next line in ups.conf.
>
>
iirc, you also need to add the "explore" flag for units that are not yet
supported.
ie

[myups]
        driver = usbhid-ups
        port = auto
        vendorid = 10af
        explore


cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20100426/167a2d3f/attachment.htm>