[Nut-upsuser] Monitoring Liebert UPS with SNMP

[Charles Lepple]

On Jan 13, 2010, at 8:55 PM, Philip Tait wrote:

> On 01/13/2010 03:29 PM, Charles Lepple wrote:
>> On Tue, Jan 12, 2010 at 4:29 PM, Philip Tait  
>> <philip at subaru.naoj.org> wrote:
>>
>>> After configuring (details below), I get:
>>>
>>> # upsdrvctl start
>>>
>>> Network UPS Tools - UPS driver controller 2.2.0-
>>> Network UPS Tools - Multi-MIBS SNMP UPS driver 0.42 (2.2.0-)
>>> Warning: This is an experimental driver.
>>> Some features may not function correctly.
>>>
>>> Unknown mibs value: auto
>>>
>> This should be a permitted option, even in 2.2.0. Is there a chance
>> that some control characters got copied into the configuration file?
>>
>>
> Thanks for the response.
>
> I did an 'od -cx' on the file, and saw no non-printing characters.

Sorry, I should have looked harder - that error message was fixed  
between 2.2.0 and the latest version.

> Using 'mbrowse', I explored the MIB, and found that this particular
> model (AP341/342) has everything under .1.3.6.1.4.1.476
> (iso.org.dod.internet.private.enterprises.emerson), which, from  
> looking
> at the source for 2.4.1, seems to be not supported. I think newer
> Liebert models use a more standard arrangement, under 'ietf'.
>
> Seems like I will have to develop my own custom solution... (or buy a
> newer network card!)

OK - let us know if you would like any help with generating a new MIB- 
to-NUT mapping.