[Nut-upsuser] communications lost/established

[Kjell Claesson]

Hi ricman,


8<--------------------snip----------------------------
> send: D
> read: timeout
> blazer_status: short reply
> Status read 3 failed
> No supported UPS detected
> Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.4.1)
> 
> where am i wrong?

1. Your ups.conf ?

2. What command did you use for debug ?
ex: /path/to/driver -a ups -u root

3. The user and group of the serial port ?
ex: crw-rw---- 1 root uucp 4, 64 18 mar 22.37 /dev/ttyS0

4. Is the user you run NUT as, a member of the group for the port?

/Kjell