[Nut-upsuser] Fwd: [Bug 662435] Re: megatec_usb driver stopped working after upgrade from 8.04 to 10.04

Arnaud Quette aquette.dev at gmail.com
Wed Oct 20 19:09:07 UTC 2010


FYI

@Arjen: anything else required?

cheers,
Arnaud

---------- Forwarded message ----------
From: MichaelE <662435 at bugs.launchpad.net>
Date: 2010/10/20
Subject: [Bug 662435] Re: megatec_usb driver stopped working after upgrade
from 8.04 to 10.04
To: aquette.dev at gmail.com


I tested the shutdown behaviour and it works as expected. The UPS
disconnected the load and then came back on again after power returned
(waiting the defined delay).

I also attached the blazer_usb output in case this is needed. If there
are other testes required to improve the driver I am happy to do this
(maybe read out the remaining battery capacity?).

This is the output of upsc:

root at xen-base:~# upsc ups01
battery.voltage: 25.70
battery.voltage.nominal: 24.0
beeper.status: enabled
device.type: ups
driver.name: blazer_usb
driver.parameter.offdelay: 60
driver.parameter.ondelay: 5
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 5161
driver.parameter.vendorid: 0665
driver.version: 2.4.3
driver.version.internal: 0.03
input.current.nominal: 2.0
input.frequency: 50.1
input.frequency.nominal: 50
input.voltage: 224.3
input.voltage.fault: 224.3
input.voltage.nominal: 230
output.voltage: 219.5
ups.delay.shutdown: 60
ups.delay.start: 300
ups.load: 11
ups.productid: 5161
ups.status: OL
ups.temperature: 25.0
ups.type: offline / line interactive
ups.vendorid: 0665

--
megatec_usb driver stopped working after upgrade from 8.04 to 10.04
https://bugs.launchpad.net/bugs/662435
You received this bug notification because you are subscribed to nut in
ubuntu.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20101020/c593fa24/attachment.htm>


More information about the Nut-upsuser mailing list