[Nut-upsuser] APC CS650 not turning load back on when power return

[Andy Hawkins]

Hi,

In article <9899B3F9-889E-441C-AEC5-FAD1EC648571 at gmail.com>,
           Charles Lepple<clepple at gmail.com> wrote:
> What does NUT show when you run "upscmd -l <name-of-ups>"?

andy-pc:~# upscmd -l apc
Instant commands supported on UPS [apc]:

beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
beeper.off - Obsolete (use beeper.disable or beeper.mute)
beeper.on - Obsolete (use beeper.enable)
load.off - Turn off the load immediately
load.off.delay - Turn off the load with a delay (seconds)
shutdown.reboot - Shut down the load briefly while rebooting the UPS
shutdown.stop - Stop a shutdown in progress
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test
test.panel.start - Start testing the UPS panel
test.panel.stop - Stop a UPS panel test

> Also, what is the exact version of NUT that you are running?

andy-pc:~# upsd --version
Network UPS Tools upsd 2.4.3

It was installed from Debian's testing, which names it as 

nut_2.4.3-1+b1_i386.deb

Thanks for any help you can offer.

Andy