[Nut-upsuser] Ippon Smart Winner 750/1000/1500/2000/3000

[????????? ???????]

????????? ?????:
> Have anybody expirience with
>
> Ippon Smart Winner 750/1000/1500/2000/3000
>
> with serial interface ?
>
> I have tryed megatec and blazer_ser drivers with no success:
>
>
> [IPPON]
> driver = megatec
> port = /dev/ttyd0
> desc = "IPPON smart winner 1500VA"
> model = "Smart Winner 750/1000/1500/2000/3000"
>
>
> # ./megatec -a IPPON -DDD
> Network UPS Tools - Megatec protocol driver 1.6 (2.4.1)
> debug level is '3'
> DTR=1, RTS=0
> Starting UPS detection process...
> Asking for UPS information [I]...
> I => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> Asking for UPS status [Q1]...
> Q1 => FAILED [timeout]
> 5 out of 5 detection attempts failed (minimum failures: 2).
> Megatec protocol UPS not detected.
>
> FreeBSD irkutsk-gate 7.2-RELEASE-p8 FreeBSD 7.2-RELEASE-p8 #0: Tue May 
> 25 17:51:43 UTC 2010 
> root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>
> I have tryed to use both /dev/ttyd0 and /dev/cuad0 devices.
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Thank you for support, the problem is solved. Wrong cable.
Now it's working with megatec driver and settings:

[IPPON]
driver = megatec
port = /dev/ttyd0
desc = "IPPON Smart Winner 1500VA"
battvolts = 53:39
mfr = "Ippon"
model = "Smart Winner"