[Nut-upsuser] [HCL] Hardware Compatibility List - PowerWalker VI 850 LCD

[Wayne Thomas]

Hello list,
just a quick email to report that the following UPS was supported (mostly)
out of the box:

Model: PowerWalker VI 850 LCD

Driver: blazer_usb

upsc Output (please note I have manually populated the high and low
voltages):
battery.charge: 100
battery.voltage: 13.50
battery.voltage.high: 13.5
battery.voltage.low: 10
battery.voltage.nominal: 12.0
beeper.status: enabled
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.6.0
driver.version.internal: 0.03
input.current.nominal: 3.0
input.frequency: 50.1
input.frequency.nominal: 50
input.voltage: 228.2
input.voltage.fault: 228.2
input.voltage.nominal: 220
output.voltage: 228.2
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 63
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

upsrw Output (I can confirm that the username and password were correct):
$ upsrw -s beeper.status=disabled myups
Username (backend): xxxxxxx
Password:
Unexpected response from upsd: ERR ACCESS-DENIED

upscmd Output (as above username and password were correct):
upscmd myups beeper.toggle
Username (backend): xxxxxxx
Password:
Unexpected response from upsd: ERR ACCESS-DENIED

Shutdown testing sequence:
Sorry, I don't have any logs (and am reluctant to shutdown now) but I can
confirm it worked as designed.

Internet Link (its the one in the middle)
http://www.powerwalker.com/line-interactive.asp?VA_level=850

Please note, I am not subscribed to the list so if you have any questions
please reply direct.

Cheers
Wayne
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110602/8a77a7c8/attachment.html>