[Nut-upsuser] Sven Power Pro 1000+

[Arjen de Korte]

Citeren Vlad <nut op wolf.umail.net>:

> I downgraded back to 2.4.3, configured nut to use megatec_usb again,  
> and it started working again.
> However, it seems strange that I cannot use the latest version.

This is not strange at all. We have reworked this driver core and  
could not find people with access to these device and willing to test  
this. Note that blazer_usb has been in the stable version since 2.4.0  
was released and have urged people to switch over to this one. We have  
had no reports that the subdriver that is used by this series of UPS  
devices was broken. In that case, there is nothing more we can do than  
to switch to the new driver and see what happens.

We've had some changes after 2.6.0 was released in this driver, so you  
could try if upgrading to that helps. There are some more changes  
underway, but due to the lack of help we're getting from the userbase,  
this is put on the back burner (without people volunteering to test  
changes, there is no point in putting effort in it). You could help us  
here by running the development version for this driver and report  
back your results, since we will need testing from as many different  
flavors of the krauler series of devices as possible (USB ID's  
0001:0000 and FFFF:0000).

Best regards, Arjen
-- 
Please keep list traffic on the list (off-list replies will be rejected)