[Nut-upsuser] blazer_usb for SVEN Power Pro+ 500 USB

Sergey Talchuk tals1975 at gmail.com
Sun Mar 27 09:06:05 UTC 2011

Arjen de Korte <nut+users <at> de-korte.org> writes:

> Citeren Arnaud Quette <aquette.dev <at> gmail.com>:
> > can you please send us an upsc output?
> Not really needed. The richcomm_usb driver supports only 'ups.status'  
> since the UPS is essentially a glorified contact closure device.
> > Have you also tested for shutdown, and upsrw / upscmd supported data?
> Testing the shutdown function would be a really good idea. Note that  
> it probably won't shutdown unless running on battery. There are no  
> parameters which can be set and the driver doesn't support instcmds  
> either.
> Best regards, Arjen

Hi Arjen,
Right. No output for the following commands:
upsrw sven
upscmd -l sven
Instant commands supported on UPS [sven]:
Shutdown function (upsmon + upssched) works fine.

Thanks for your help!

Best regards,

More information about the Nut-upsuser mailing list