[Nut-upsuser] UPS Liebert GXT3 config

[Juan Pablo Valles]

Hi all,

I´ve a UPS Liebert GXT3 500-3000VA with USB port.
I´ve install NUT version 2.2.2 from repository packages for Debian Lenny.

Linux kernel 2.6.26

I´ve try to use usbhid-ups driver in ups.conf

[liebert]
driver=usbhid-ups
port=/dev/usb/hiddev0

Debian get the usb:
# lsusb -v

Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x10af Liebert Corp.
  idProduct          0x0008 PowerSure Interactive UPS
  bcdDevice            0.00
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
OTG Descriptor:
  bLength                 3
  bDescriptorType         9
  bmAttributes         0x00
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           37
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4
    bmAttributes         0x40
      (Missing must-be-set bit!)
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              5
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     260
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              32
cannot read device status, Protocol error (71)

When I use:

# ./usbhid-ups -a liebert -DDDD

Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2)

debug level is '4'
upsdrv_initups...
Checking device (1D6B/0002) (005/001)
- VendorID: 1d6b
- ProductID: 0002
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 005
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (004/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 004
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (003/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (002/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (10AF/0008) (001/002)
- VendorID: 10af
- ProductID: 0008
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 001
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (001/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 001
Trying to match device
Device does not match - skipping
No appropriate HID device found
No matching HID UPS found

# upsdrvctl start
Network UPS Tools - UPS driver controller 2.2.2
Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2)

No matching HID UPS found
Driver failed to start (exit status=1)


That means the usbhid-ups driver don´t recognize my device?

Any help?


Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110530/30fdc829/attachment.html>