[Nut-upsuser] New UPS for Support List

[Charles Lepple]

On Sep 30, 2011, at 10:23 AM, Arnaud Quette wrote:

> Hi Simon,
>
> 2011/8/30 Dwyer, Simon <SDwyer at federalit.net>:
>> Hi All,
>>
>> I have got the Belkin F6S600auUSB UPS working with the blazer_usb  
>> driver.
>>
>> I pulled the power to the ups last night and it sent a message to  
>> the server saying it was on battery then ran for another 10 minutes  
>> and then sent a message to the server telling it to shut down,  
>> which it did.
>>
>> upswr did not return anything.
>>
>> [root at verity ~]# upsc ups
>> battery.voltage: 13.50
>> battery.voltage.nominal: 12.0
>> beeper.status: enabled
>> device.type: ups
>> driver.name: blazer_usb
>> driver.parameter.pollinterval: 2
>> driver.parameter.port: auto
>> driver.version: 2.4.3
>> driver.version.internal: 0.03
>> input.current.nominal: 2.0
>> input.frequency: 49.9
>> input.frequency.nominal: 50
>> input.voltage: 242.9
>> input.voltage.fault: 242.9
>> input.voltage.nominal: 230
>> output.voltage: 237.5
>> ups.delay.shutdown: 30
>> ups.delay.start: 180
>> ups.load: 0
>> ups.productid: 5161

Arnaud - this     ^^^^

>> ups.status: OL
>> ups.temperature: 25.0
>> ups.type: offline / line interactive
>> ups.vendorid: 0665

and this?        ^^^^

>>
>>
>> [root at verity ~]# upscmd -l ups
>> Instant commands supported on UPS [ups]:
>>
>> beeper.toggle - Toggle the UPS beeper
>> load.off - Turn off the load immediately
>> load.on - Turn on the load immediately
>> shutdown.return - Turn off the load and return when power is back
>> shutdown.stayoff - Turn off the load and remain off
>> shutdown.stop - Stop a shutdown in progress
>> test.battery.start - Start a battery test
>> test.battery.start.deep - Start a deep battery test
>> test.battery.start.quick - Start a quick battery test
>> test.battery.stop - Stop the battery test
>>
>> If any more info is needed just let me know.
>
> thanks for your report.
> I've just committed this entry in the trunk, r3264.
> for the sake of completion, could you also tell us what are the USB
> VendorID and ProductID?
>
> cheers,
> Arnaud