[Nut-upsuser] Support for Online Yunto and Zinto
Mario Giammarco
mgiammarco at gmail.com
Wed Feb 1 19:58:17 UTC 2012
Here we go!
This one for 06da:0601:
0.000000 send_to_all: SETINFO driver.parameter.port "auto"
0.000117 send_to_all: SETINFO driver.parameter.subdriver "ippon"
0.000179 send_to_all: SETINFO driver.parameter.vendorid "06da"
0.000230 send_to_all: SETINFO driver.parameter.productid "0601"
0.000315 debug level is '5'
0.002600 Checking device (1D6B/0003) (009/001)
0.002832 - VendorID: 1d6b
0.002879 - ProductID: 0003
0.002916 - Manufacturer: Linux 3.0.0-16-generic xhci_hcd
0.002955 - Product: xHCI Host Controller
0.002992 - Serial Number: 0000:03:00.0
0.003028 - Bus: 009
0.003063 Trying to match device
0.003118 Device does not match - skipping
0.003165 Checking device (1D6B/0002) (008/001)
0.003245 - VendorID: 1d6b
0.003285 - ProductID: 0002
0.003321 - Manufacturer: Linux 3.0.0-16-generic xhci_hcd
0.003417 - Product: xHCI Host Controller
0.003453 - Serial Number: 0000:03:00.0
0.003489 - Bus: 008
0.003524 Trying to match device
0.003562 Device does not match - skipping
0.003604 Checking device (1D6B/0001) (007/001)
0.003677 - VendorID: 1d6b
0.003716 - ProductID: 0001
0.003751 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd
0.003787 - Product: OHCI Host Controller
0.003823 - Serial Number: 0000:00:16.0
0.003859 - Bus: 007
0.003894 Trying to match device
0.003932 Device does not match - skipping
0.003974 Checking device (1D6B/0001) (006/001)
0.004045 - VendorID: 1d6b
0.004083 - ProductID: 0001
0.004118 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd
0.004154 - Product: OHCI Host Controller
0.004190 - Serial Number: 0000:00:14.5
0.004226 - Bus: 006
0.004260 Trying to match device
0.004299 Device does not match - skipping
0.004340 Checking device (1D6B/0001) (005/001)
0.004410 - VendorID: 1d6b
0.004454 - ProductID: 0001
0.004489 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd
0.004526 - Product: OHCI Host Controller
0.004562 - Serial Number: 0000:00:13.0
0.004834 - Bus: 005
0.004872 Trying to match device
0.004911 Device does not match - skipping
0.004954 Checking device (1D6B/0001) (004/001)
0.005027 - VendorID: 1d6b
0.005065 - ProductID: 0001
0.005101 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd
0.005138 - Product: OHCI Host Controller
0.005174 - Serial Number: 0000:00:12.0
0.005211 - Bus: 004
0.005248 Trying to match device
0.005288 Device does not match - skipping
0.005329 Checking device (1D6B/0002) (003/001)
0.005449 - VendorID: 1d6b
0.005524 - ProductID: 0002
0.005560 - Manufacturer: Linux 3.0.0-16-generic ehci_hcd
0.005597 - Product: EHCI Host Controller
0.005634 - Serial Number: 0000:00:16.2
0.005670 - Bus: 003
0.005705 Trying to match device
0.005744 Device does not match - skipping
0.005787 Checking device (058F/6387) (002/006)
0.008028 - VendorID: 058f
0.008069 - ProductID: 6387
0.008080 - Manufacturer: Generic
0.008092 - Product: Mass Storage
0.008103 - Serial Number: FFB279FA
0.010059 - Bus: 002
0.010090 Trying to match device
0.010168 Device does not match - skipping
0.010201 Checking device (046D/C50E) (002/005)
0.017189 - VendorID: 046d
0.017231 - ProductID: c50e
0.017241 - Manufacturer: Logitech
0.017252 - Product: USB Receiver
0.017262 - Serial Number: unknown
0.017272 - Bus: 002
0.017282 Trying to match device
0.017304 Device does not match - skipping
0.017330 Checking device (06DA/0002) (002/004)
0.020214 - VendorID: 06da
0.020359 - ProductID: 0002
0.020370 - Manufacturer: ONLINE
0.020382 - Product: YUNTO
0.020392 - Serial Number: unknown
0.020402 - Bus: 002
0.020412 Trying to match device
0.020496 Device does not match - skipping
0.020528 Checking device (06DA/0601) (002/003)
0.032763 - VendorID: 06da
0.032814 - ProductID: 0601
0.032825 - Manufacturer: ONLINE
0.032835 - Product: ZINTO
0.032848 - Serial Number: unknown
0.032858 - Bus: 002
0.032868 Trying to match device
0.032939 Device matches
0.033027 failed to claim USB device: could not claim interface
0: Device or resource busy
0.033429 detached kernel driver from USB device...
0.035076 send_to_all: SETINFO ups.vendorid "06da"
0.035123 send_to_all: SETINFO ups.productid "0601"
0.035153 send_to_all: SETINFO device.type "ups"
0.035182 send_to_all: SETINFO driver.version "2.6.1"
0.035198 send_to_all: SETINFO driver.version.internal "0.03"
0.035213 send_to_all: SETINFO driver.name "blazer_usb"
0.035225 Trying megatec protocol...
0.037597 send: Q1
0.286187 read: (227.0 222.0 227.0 036 50.0 27.4 60.4 00001001
0.286284 send_to_all: SETINFO input.voltage "227.0"
0.286309 send_to_all: SETINFO input.voltage.fault "222.0"
0.286329 send_to_all: SETINFO output.voltage "227.0"
0.286371 send_to_all: SETINFO ups.load "36"
0.286388 send_to_all: SETINFO input.frequency "50.0"
0.286409 send_to_all: SETINFO battery.voltage "27.40"
0.286427 send_to_all: SETINFO ups.temperature "60.4"
0.286442 send_to_all: SETINFO beeper.status "enabled"
0.286458 send_to_all: SETINFO ups.type "offline / line interactive"
0.286477 send_to_all: SETINFO ups.status "OL"
0.286490 Status read in 1 tries
0.286501 Supported UPS detected with megatec protocol
0.289097 send: F
0.478172 read: #220.0 003 024.0 50.0
0.478246 send_to_all: SETINFO input.voltage.nominal "220"
0.478267 send_to_all: SETINFO input.current.nominal "3.0"
0.478288 send_to_all: SETINFO battery.voltage.nominal "24.0"
0.478306 send_to_all: SETINFO input.frequency.nominal "50"
0.478318 Ratings read in 1 tries
0.480405 send: I
0.622185 read: I
0.622238 blazer_vendor: invalid start character [49]
0.622251 Vendor information read 1 failed
0.624344 send: I
0.766136 read: I
0.766183 blazer_vendor: invalid start character [49]
0.766195 Vendor information read 2 failed
0.768442 send: I
0.910110 read: I
0.910154 blazer_vendor: invalid start character [49]
0.910167 Vendor information read 3 failed
0.910178 Vendor information unavailable
0.910191 Battery runtime will not be calculated (runtimecal not set)
0.910217 send_to_all: SETINFO ups.delay.start "180"
0.910233 send_to_all: SETINFO ups.delay.shutdown "30"
0.910247 send_to_all: ADDCMD beeper.toggle
0.910259 send_to_all: ADDCMD load.off
0.910271 send_to_all: ADDCMD load.on
0.910283 send_to_all: ADDCMD shutdown.return
0.910296 send_to_all: ADDCMD shutdown.stayoff
0.910308 send_to_all: ADDCMD shutdown.stop
0.910321 send_to_all: ADDCMD test.battery.start
0.910334 send_to_all: ADDCMD test.battery.start.deep
0.910347 send_to_all: ADDCMD test.battery.start.quick
0.910360 send_to_all: ADDCMD test.battery.stop
0.912513 send: Q1
1.166081 read: (227.0 227.0 227.0 036 50.0 27.4 60.4 00001001
1.166154 send_to_all: SETINFO input.voltage.fault "227.0"
1.166207 send_to_all: DATAOK
1.166348 dstate_init: sock /var/run/nut/blazer_usb-mieionline
open on fd 5
1.166369 send_to_all: SETINFO driver.parameter.pollinterval "2"
1.168210 send: Q1
1.422030 read: (226.9 226.9 226.9 035 50.0 27.4 60.4 00001001
1.422098 send_to_all: SETINFO input.voltage "226.9"
1.422120 send_to_all: SETINFO input.voltage.fault "226.9"
1.422140 send_to_all: SETINFO output.voltage "226.9"
1.422161 send_to_all: SETINFO ups.load "35"
3.170193 send: Q1
3.421773 read: (227.1 227.1 227.1 035 50.0 27.4 60.4 00001001
3.421879 send_to_all: SETINFO input.voltage "227.1"
3.421901 send_to_all: SETINFO input.voltage.fault "227.1"
3.421922 send_to_all: SETINFO output.voltage "227.1"
5.171788 send: Q1
5.421688 read: (227.1 227.1 227.1 040 50.0 27.4 60.4 00001001
5.421776 send_to_all: SETINFO ups.load "40"
7.173601 send: Q1
7.421350 read: (226.8 226.8 226.8 034 50.0 27.4 60.4 00001001
7.421422 send_to_all: SETINFO input.voltage "226.8"
7.421445 send_to_all: SETINFO input.voltage.fault "226.8"
7.421465 send_to_all: SETINFO output.voltage "226.8"
7.423444 send_to_all: SETINFO ups.load "34"
9.175457 send: Q1
9.421074 read: (226.9 226.9 226.9 036 50.0 27.4 60.4 00001001
9.421141 send_to_all: SETINFO input.voltage "226.9"
9.421163 send_to_all: SETINFO input.voltage.fault "226.9"
9.421183 send_to_all: SETINFO output.voltage "226.9"
9.421205 send_to_all: SETINFO ups.load "36"
11.175988 send: Q1
11.420717 read: (226.6 226.6 226.6 041 50.0 27.4 60.4 00001001
11.420796 send_to_all: SETINFO input.voltage "226.6"
11.420819 send_to_all: SETINFO input.voltage.fault "226.6"
11.420840 send_to_all: SETINFO output.voltage "226.6"
11.420861 send_to_all: SETINFO ups.load "41"
13.177678 send: Q1
13.420493 read: (226.5 226.6 226.6 038 50.0 27.4 60.4 00001001
13.420559 send_to_all: SETINFO input.voltage "226.5"
13.420593 send_to_all: SETINFO ups.load "38"
15.179302 send: Q1
15.436100 read: (226.7 226.7 226.7 039 50.0 27.4 60.4 00001001
15.436221 send_to_all: SETINFO input.voltage "226.7"
15.436274 send_to_all: SETINFO input.voltage.fault "226.7"
15.436409 send_to_all: SETINFO output.voltage "226.7"
15.436462 send_to_all: SETINFO ups.load "39"
17.181454 send: Q1
17.435942 read: (226.6 226.6 226.6 037 50.0 27.4 60.4 00001001
17.436010 send_to_all: SETINFO input.voltage "226.6"
17.436039 send_to_all: SETINFO input.voltage.fault "226.6"
17.436059 send_to_all: SETINFO output.voltage "226.6"
17.436080 send_to_all: SETINFO ups.load "37"
19.183448 send: Q1
19.435676 read: (226.5 226.5 226.5 035 50.0 27.4 60.4 00001001
19.435741 send_to_all: SETINFO input.voltage "226.5"
19.435763 send_to_all: SETINFO input.voltage.fault "226.5"
19.435783 send_to_all: SETINFO output.voltage "226.5"
19.435805 send_to_all: SETINFO ups.load "35"
21.183681 send: Q1
21.435385 read: (226.6 226.6 226.6 035 50.0 27.4 60.4 00001001
21.435456 send_to_all: SETINFO input.voltage "226.6"
21.435478 send_to_all: SETINFO input.voltage.fault "226.6"
21.435499 send_to_all: SETINFO output.voltage "226.6"
23.185874 send: Q1
23.435072 read: (226.5 226.5 226.5 034 50.0 27.4 60.4 00001001
23.435137 send_to_all: SETINFO input.voltage "226.5"
23.435159 send_to_all: SETINFO input.voltage.fault "226.5"
23.435181 send_to_all: SETINFO output.voltage "226.5"
23.435202 send_to_all: SETINFO ups.load "34"
25.187621 send: Q1
25.434841 read: (226.5 226.5 226.5 036 50.0 27.4 60.4 00001001
25.434924 send_to_all: SETINFO ups.load "36"
27.188584 send: Q1
27.434544 read: (226.3 226.3 226.3 035 50.0 27.4 60.4 00001001
27.434611 send_to_all: SETINFO input.voltage "226.3"
27.434633 send_to_all: SETINFO input.voltage.fault "226.3"
27.434653 send_to_all: SETINFO output.voltage "226.3"
27.434675 send_to_all: SETINFO ups.load "35"
29.189787 send: Q1
29.434178 read: (226.5 226.5 226.5 036 50.0 27.4 60.4 00001001
29.434249 send_to_all: SETINFO input.voltage "226.5"
29.434271 send_to_all: SETINFO input.voltage.fault "226.5"
29.434292 send_to_all: SETINFO output.voltage "226.5"
29.434314 send_to_all: SETINFO ups.load "36"
31.191738 send: Q1
31.450026 read: (226.3 226.3 226.3 039 50.0 27.4 60.4 00001001
31.450091 send_to_all: SETINFO input.voltage "226.3"
31.450114 send_to_all: SETINFO input.voltage.fault "226.3"
31.450134 send_to_all: SETINFO output.voltage "226.3"
31.450154 send_to_all: SETINFO ups.load "39"
33.193844 send: Q1
33.449923 read: (226.3 226.3 226.3 034 50.0 27.4 60.4 00001001
33.450027 send_to_all: SETINFO ups.load "34"
2012/2/1 Arnaud Quette <aquette.dev at gmail.com>:
> 2012/2/1 Mario <mgiammarco at gmail.com>:
>> Arnaud Quette <aquette.dev <at> gmail.com> writes:
>>
>>> so you should also use "sudo", Ie:
>>> $ sudo /path/to/blazer_usb -DDDDD -a <upsname>
>>>
>> Unfortunately I am already root, I have enabled the root account. I have also
>> tried to kill processes that may lock usb but with no luck.
>>
>> What can I do?
>
> I forgot a point: since your USB IDs are not yet known, udev rules are
> not there.
> So try running as root using:
> $ /path/to/blazer_usb -u root -DDDDD -a <upsname>
> $ upsd -u root
>
> and you should be done.
>
> cheers,
> Arnaud
> --
> Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.free.fr/
More information about the Nut-upsuser
mailing list