[Nut-upsuser] Network UPS Tools version 2.6.3 released

[Arnaud Quette]

2012/1/6 Charles Lepple <clepple at gmail.com>

> On Jan 6, 2012, at 6:42 AM, Arnaud Quette wrote:
> > 2012/1/6 Glen Ogilvie <nelg at linuxsolutions.co.nz>
> [...]
> >> The entry I am using is:
> >>
> >> [nutdev1]
> >>       driver = "blazer_usb"
> >>       port = "auto"
> >>       vendorid = "0001"
> >>       productid = "0000"
> >>       bus = "001"
> >>       langid_fix = "0x0409"
> [...]
> > note that mentioning vendorid, productid and bus is only needed when you
> > have multiple UPS on the same box.
> > it's otherwise not useful.
>
>
> Arnaud,
>
> At the beginning of the thread, Glen mentioned that he took the output of
> nut_scanner and added the 'langid_fix' parameter. So if I am not mistaken,
> it is nut_scanner which added the 'bus' parameter.
>

fully right!
this (adding the more possible match info) was something I asked Fred to
do, since this should prevent issues with multiple similar devices.
But Glen's issue, with the changing bus number, is puzzling!

cheers,
Arnaud
-- 
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120106/16f6d489/attachment.html>