[Nut-upsuser] UPS restart delay

Arnaud Quette aquette.dev at gmail.com
Fri Jul 27 12:27:12 UTC 2012


Hi Dan,

newmge-shut prior to 2.6.4 were buggy. So stick with this one. Note that it
will supersed mge-shut in 2.6.5.

Cheers
Arno (on vacation)

(sent from my S3... please excuse my brevity)
Le 27 juil. 2012 11:32, "Daniel O'Connor" <doconnor at gsoft.com.au> a écrit :

>
> On 27/07/2012, at 17:36, Daniel O'Connor wrote:
> > On 21/07/2012, at 22:55, Charles Lepple wrote:
> >>> Does anyone know if this is possible? A setting like this would
> provide some hysteresis for successive power failures which would be handy
> to have :)
> >>
> >> I don't know about that specific hardware, but the variables which
> would control this are battery.charge.restart ("Minimum battery level for
> UPS restart after power-off") and ups.delay.start ("Interval to wait before
> restarting the load (seconds)"). Check the output of "upsrw <ups>" to see
> if that variable is supported with your combination of UPS and driver.
> >>
> >> Which version of NUT are you using? There might be a newmge-shut driver
> included as well.
> >
> > I tried mge-shut in 2.6 with no change, but newmge-shut with 2.6 showed
> this parameter, thanks!
>
>
> I retried 2.4 which has the new driver however its behaviour is different
> to 2.6.
>
> It shows..
> [dhcp-72114 8:07] ~ >upsc ups1 at localhost| grep battery
> battery.capacity: 9.00
> battery.charge: 100
> battery.charge.low: 100
> battery.charge.restart: 100
> battery.runtime: 3960
> battery.type: PbAc
>
> vs 2.6..
> [dhcp-72114 8:05] ~/nut-2.6.4 >upsc ups1 at localhost| grep battery
> battery.capacity: 9.00
> battery.charge: 100
> battery.charge.low: 50
> battery.charge.restart: 0
> battery.energysave: no
> battery.protection: yes
> battery.runtime: 3960
> battery.type: PbAc
> ups.start.battery: yes
>
> So I'll stick with 2.6 I think and do some more tests.
>
> --
> Daniel O'Connor software and network engineer
> for Genesis Software - http://www.gsoft.com.au
> "The nice thing about standards is that there
> are so many of them to choose from."
>   -- Andrew Tanenbaum
> GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
>
>
>
>
>
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120727/b1d9a744/attachment.html>


More information about the Nut-upsuser mailing list