[Nut-upsuser] CyberPower DX600E won't switch up after power is back

[Franck]

Hello
I have an issue with an CyberPower DX600E,
it doesn't switch up when the power is back; after it has been 
unloaded;
is it because of one of those variables ?
regards
Franck

#upsc myups
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 1380
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 4.7
battery.voltage.nominal: 12
device.mfr: CPS
device.model: DX600E
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.4.3
driver.version.data: CyberPower HID 0.3
driver.version.internal: 0.34
input.transfer.high: 0
input.transfer.low: 0
input.voltage: 230.0
input.voltage.nominal: 230
output.voltage: 238.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 31
ups.mfr: CPS
ups.model: DX600E
ups.productid: 0501
ups.realpower.nominal: 360
ups.status: OL
ups.timer.shutdown: -60
ups.timer.start: 0
ups.vendorid: 0764

---
http://secretfatty.net