[Nut-upsuser] Unable to disable beeper on Powercom Imperial IMP-525AP

[Sergey Talchuk]

Hi Arnaud,

Please find the file attached.

Thank you,
Sergey

On Mon, Sep 24, 2012 at 12:02 PM, Arnaud Quette <aquette.dev at gmail.com>wrote:

>
> 2012/9/24 Sergey Talchuk <tals1975 at gmail.com>
>
>> Hi Arnaud!
>>
>
> Hi Sergey,
>
> Thanks for you reply.
>> Please find the file attached.
>>
>
> I forgot to ask you to compress the output before sending it to the list
> (we have a 40Kb limit).
>
> Could you please do the following tests:
> # upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle 2
> # upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle disable
>
> check the beeper.status and send me back the *compressed* output.
> Depending on your feedback, I should be able to address this
> programmatically.
>
> cheers,
> Arnaud
> --
> Linux / Unix / Opensource Engineering Expert - Eaton -
> http://opensource.eaton.com
> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
>
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.fr
>
>
>> On Wed, Sep 19, 2012 at 9:39 PM, Arnaud Quette <aquette.dev at gmail.com>wrote:
>>
>>>
>>> 2012/9/19 Sergey Talchuk <tals1975 at gmail.com>
>>>
>>>> Hi Arnaud!
>>>>
>>>
>>> Hi Sergey
>>>
>>> Powercom Imperial IMP-525AP seems to be fully compatible with NUT.
>>>> Unfortunately, I can not disable beeper.
>>>>
>>>> upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle
>>>> returns *OK*, however, ups.beeper.status=enabled
>>>>
>>>> Thank you,
>>>> Sergey
>>>>
>>>> ==========
>>>> Additional info:
>>>> 1)
>>>> $ upsc powercom
>>>> battery.charge: 100
>>>> battery.charge.low: 10
>>>> battery.charge.warning: 30
>>>> battery.date: 2010/01/01
>>>> battery.runtime: 2432
>>>> battery.type: PbAc
>>>> device.mfr: POWERCOM Co.,LTD
>>>> device.model:   UPS  IMP--525AP FW3.A2
>>>> device.serial: 3A2-0000-0001
>>>> device.type: ups
>>>> driver.name: usbhid-ups
>>>> driver.parameter.pollfreq: 30
>>>> driver.parameter.pollinterval: 2
>>>> driver.parameter.port: auto
>>>> driver.version: 2.6.5
>>>> driver.version.data: PowerCOM HID 0.3
>>>> driver.version.internal: 0.37
>>>> input.frequency: 50.0
>>>> input.voltage: 230.0
>>>> input.voltage.nominal: 220
>>>> output.frequency: 50.0
>>>> output.voltage: 230.0
>>>> output.voltage.nominal: 220
>>>> ups.beeper.status: enabled
>>>> ups.date: 2010/01/01
>>>> ups.load: 0
>>>> ups.mfr: POWERCOM Co.,LTD
>>>> ups.model:   UPS  IMP--525AP FW3.A2
>>>> ups.productid: 00a2
>>>> ups.serial: 3A2-0000-0001
>>>> ups.status: OL
>>>> ups.test.result: Done and passed
>>>> ups.vendorid: 0d9f
>>>>
>>>> 2)
>>>> $ upscmd -l powercom
>>>> Instant commands supported on UPS [powercom]:
>>>>
>>>> beeper.toggle - Toggle the UPS beeper
>>>> test.battery.start.quick - Start a quick battery test
>>>>
>>>> 3)
>>>> $ upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle
>>>> OK
>>>>
>>>> 4)
>>>> $ upsc powercom | grep 'beeper'
>>>> ups.beeper.status: enabled
>>>>
>>>
>>> can you please:
>>> - restart the driver in debug mode (level 5) using:
>>> # upsdrvctl stop powercom && /path/to/usbhid-ups -DDDDD -a powercom
>>> - in a separate console, send your upscmd, as in the above step (3)
>>> - send the driver trace excerpt, including at least 10 seconds of traces
>>> after executing the command.
>>>
>>> cheers,
>>> Arnaud
>>> --
>>> NUT Project Leader - http://www.networkupstools.org
>>> Debian Developer - http://www.debian.org
>>> Free Software Developer - http://arnaud.quette.fr
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121001/2316137f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: beeper_toggle.7z
Type: application/octet-stream
Size: 18210 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121001/2316137f/attachment-0001.obj>