[Nut-upsuser] NUT v2.6.4 with HP AF401A won't start

[Arnaud Quette]

2012/10/16 Pratt Chris <Chris.Pratt at comptel.com>:
> Hi.

Hi Chris,

>  I’m trying to configure NUT to manage a HP R12000/3 3-phase UPS fitted with
> an AF401A management module but it immediately crashes with a segmentation
> fault.

right, we have recently identified a regression WRT outlet handling.
I have a stagging patch for ~2 months, but still no time to test and
complete it.

Would you be able to patch, compile and test on your side?

Best regards,
Arnaud
-- 
Linux / Unix / Opensource Engineering Expert - Eaton -
http://opensource.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.fr

>  O/S is CentOS 6.3 64-bit
>
> NUT built from tarball
>
> AF401A Firmware version          2.1.3
>
>  Extract from /etc/ups/ups.conf
>
> [UPS-HP01]
>
>         driver = snmp-ups
>
>         port = 192.168.0.89
>
>         desc = " HP R12000/3 UPS"
>
>
>
> Output from starting the driver
>
> [root at ups-monitor log]# upsdrvctl start
>
> Network UPS Tools - UPS driver controller 2.6.4
>
> Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4)
>
> kill: No such process
>
> Detected HP R12000/3UPS on host 192.168.0.89 (mib: cpqpower 1.5)
>
> Driver exited abnormally
>
> [root at ups-monitor log]#
>
>
>
> Extract from /var/log/messages
>
> Oct 15 15:02:32 ups-monitor kernel: snmp-ups[16840]: segfault at 0 ip
> 000000354707a98c sp 00007fff11f2a8b8 error 4 in
> libc-2.12.so[3547000000+189000]
>
> Debug output attached.
>
> I’ve downloaded the latest mib file (v1.64) from HP’s website but I can’t
> find any way to add it to the source files.  I’ve seen references to the
> mib2nut mapping but, again, no help on how to achieve this.
>
>
>
> Thanks,
>
>
>
>
>
>
>
> Chris Pratt
>
> Development Infrastructure Manager
>
> Comptel Corporation
>
> 69 Suttons Business Park, Sutton Park Avenue, Reading, RG6 1AZ, UK
>
> T: +44 118 929 4176 | M: +44 7979 854 307 | F: +44 118 929 4001
>
> Chris.Pratt at comptel.com
>
> www.comptel.com
>
>
>
>
>
>
> ________________________________
> Disclaimer: This message and any attachments thereto are intended solely for
> the addressed recipient(s) and may contain confidential information.
> If you are not the intended recipient, please notify the sender by reply
> e-mail and delete the e-mail (including any attachments thereto) without
> producing, distributing or retaining any copies thereof. Any review,
> dissemination or other use of, or taking of any action in reliance upon,
> this information by persons or entities other than the intended recipient(s)
> is prohibited.
> Thank you.
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser