[Nut-upsuser] Data stale and Back UPS ES

[FredericBohe at Eaton.com]

Hello Denis,

I am a bit lost now.
Can you get further debugging information regarding USB ?
This is the way to go :

1- Get Sysinternals' Debugview here http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx
2- Run DebugView
3- In a console, type :
set USB_DEBUG=255
4- In the same console start usbhid-ups 

You should see "libusb0-dll" messages appear in debugview. Please send me this log.

It would be great if you can do this test for both version of nut (2.6.0 and 2.6.5)

Thank you.
Fred


--
Eaton Opensource Team - http://opensource.eaton.com



-----------------------------

-----------------------------

________________________________________
From: Denis Serov [dns-srv at yandex.ru]
Sent: Monday, September 03, 2012 9:04 PM
To: Bohe, Frederic; nut-upsuser at lists.alioth.debian.org
Subject: RE: [Nut-upsuser] Data stale and Back UPS ES

Hello Frederic!

Yes, I told about libusb driver, not usbhid-ups one. Anyway, here are the logs...

Thanks!

Denis

> -----Original Message-----
> From: FredericBohe at Eaton.com [mailto:FredericBohe at Eaton.com]
> Sent: Monday, September 03, 2012 3:17 PM
> To: dns-srv at yandex.ru; nut-upsuser at lists.alioth.debian.org
> Subject: RE: [Nut-upsuser] Data stale and Back UPS ES
>
>
>> Finally, I installed 2.6.5-1 with drivers from 2.6.0-1 and got data stale (as in my first message).
>
> I guess you mean libusb drivers, not usbhid-ups driver ?
>
> I have checked the code history for usbhid-ups driver without finding anything that rings a bell on this issue.
>
> Can you send the complete (and compressed) output of usbhid-ups  version 2.6.0-1 and 2.6.5-1 (let's say the first 10 seconds using -DDDDD switch) please ?
>
> Regards,
> Fred