[Nut-upsuser] bcmxcp_usb can not communicate with Eaton Powerware 5110

[Eugene Jurchenko]

Massimo Gais <simosagi9 <at> gmail.com> writes:

> 
> On Sun, Aug 12, 2012 at 5:11 AM, Greg Vickers <daehenoc <at> iinet.net.au> 
wrote:
> > On 11/08/12 06:58, Arnaud Quette wrote:
> >
> > Hi Massimo and Greg,
> >
> > @Greg: if you yet returned your unit, you now have a solution ;)
> >
> > I have not yet gotten rid of it, so thank you very much!  It's a case of
> > download, extract, apply patch, and compile on my RPi, correct?
> >
> > thanks for the effort for the patch!
> >
> > welcome ;)
> >
> 
> Hello Greg,
> yes you can compile it directly on the RPI. See anyway that if you
> have the old deb package installed and you want to replace only the
> recompiled driver, you may have some mismatch with the
> pidpath/statepath directories (/var/state/ups vs /var/run/nut). I
> tried to do it in a clean way by making a debian package on the RPi,
> but it was requiring to install all the documentation tools, and I did
> not have enough SD disk space for that.
> 
> Cheers,
> Massimo
> 

Greetings,

Glad that I've found some info about the issue. I have same problem with the 
same UPS on RPi. Unfortunately link for the patch is no longer valid. Could you 
send it one more time or the compiled package for RPi would be more appreciable. 
Thank you

With best regards,
Eugene