[Nut-upsuser] Liebert GXT3 ID 10af:0000 Not working

[Charles Lepple]

On Aug 19, 2013, at 9:10 PM, Charles Lepple wrote:

> On Aug 19, 2013, at 12:58 PM, Korviakov Andrey wrote:
> 
>> I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2.
>> lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS
>> 
>> And this UPS detected only with this section in ups.conf: 
>> 
>> [liebert]
>>     driver = liebert
>>     port = /dev/ttyS0
> 
> I am confused. Are you using a serial cable with the liebert driver, or a USB cable with the usbhid-ups driver?

Actually, for the serial 'liebert' driver, it will only detect OL/OB/LB.

We haven't had much luck with the USB firmware on other Liebert units, but if it's anything like some of the other UPSes out there, you may need to power the UPS completely off (unplug from the wall, no LEDs on, etc.) before switching between USB and serial.

Also, running the usbhid-ups driver with debugging enabled may shed some light on the problem.