[Nut-upsuser] HP R12000/3 UPS reports status as OL DISCHRG OB
Chris.Pratt at comptel.com
Mon Jul 15 13:35:34 UTC 2013
Debug output attached. As you suspected, this is a fairly large 3-phase UPS running a range of live kit, so removing the supply is not an option.
Development Infrastructure Manager
T: +44 118 929 4176 | M: +44 7979 854 307 | F: +44 118 929 4001
From: Charles Lepple [mailto:clepple at gmail.com]
Sent: 15 July 2013 13:21
To: Pratt Chris
Cc: nut-upsuser at lists.alioth.debian.org
Subject: Re: [Nut-upsuser] HP R12000/3 UPS reports status as OL DISCHRG OB
On Jul 15, 2013, at 6:17 AM, Pratt Chris wrote:
> Back before Christmas Arnaud sent me a patch for the snmp-ups driver for my HP R12000/3 UPS. Unfortunately shortly after I had to take quite a lot of sick leave so wasn't able to progress it, but I'm working on it again now.
Is this the patch you are referring to?
> I'm at the point where I can start the driver with upsdrvctl and start the daemon with upsd. When I check the UPS status though it shows as OL DISCHRG OB, which can't be right (it should just be OL).
Please send the debug output from starting the snmp-ups driver directly (rather than through upsdrvctl). That should explain why the driver is getting those particular status bits. Bonus points if you can show the output for both online as well as on-battery conditions, although I recognize that can be difficult if the UPS is in production use.
clepple at gmail
Disclaimer: This message and any attachments thereto are intended solely for the addressed recipient(s) and may contain confidential information.
If you are not the intended recipient, please notify the sender by reply e-mail and delete the e-mail (including any attachments thereto) without producing, distributing or retaining any copies thereof. Any review, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient(s) is prohibited.
More information about the Nut-upsuser