[Nut-upsuser] Cannot connect to a Eaton Ellipse Pulsar ASR/6000VA usbs

[Charles Lepple]

On Jun 19, 2013, at 4:51 PM, Louis Chaillet wrote:

> # Network UPS Tools: example ups.conf
> [eaton]
>        driver = usbhid-ups
>          port = auto
> 	vendor = 0463

Identifying the vendor or product is not strictly required, but if you provide 'vendor', it must match the 'Manufacturer:' value ('EATON', in your case).

To match against the hex values, use 'vendorid' (or 'productid').

Reference: http://www.networkupstools.org/docs/man/usbhid-ups.html#_extra_arguments

-- 
Charles Lepple
clepple at gmail