[Nut-upsuser] Request for advice about NUTdrivers/bcmxcp

[Arnaud Quette]

2013/11/18 Vladimir Nesterenko <nesterenko.vy at gmail.com>

>
>
> ---------- Forwarded message ----------
> From: Vladimir Nesterenko <nesterenko.vy at gmail.com>
> Date: 2013/11/13
> Subject: Request for advice about NUTdrivers/bcmxcp
> To: Arnaud Quette <ArnaudQuette at eaton.com>
>
>
> Hello.
> I am using this driver on openSUSE 12.3 with EATON Powerware 5110 the
> basic functions work fine, but there is a need to solve two problems:
> 1. There is a need to shut down or block the sound when running on
> battery. This device has this feature when used by Eaton LanSafe v.6 on
> Windows. In other UPS drivers this feature is available through the command
> beeper.toggle. Is there any chance of getting this command in driver
> bcmxcp(bcmxcp_usb)?
> 2. The default settings execute system shutdown by the event "low battery"
> (LB), but I need to turn off when the level of charge remaining 30%. If to
> you not difficult, tell me how this can be implemented.
>
> P.S. I would be very grateful if you can give any advice or technical
> information for upgrading this driver.
>

Hello Vladimir,

sorry for the late in answering, but the NUT Community could told you that
I've not really been present nor reactive over the past year...
that said, here are base answers to your questions:
1. there have been recent updates from Alf Høgemark, along with some others.
We are currently working hard to release 2.7.1, which will ship these
improvements.
2. http://www.networkupstools.org/docs/user-manual.chunked/ar01s07.html

cheers,
Arno
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20131118/f5d64492/attachment.html>