[Nut-upsuser] Eaton PowerWare 9120 3000i

[panovd]

Hi there, all 

I have subj UPS, connected by USB. 

ups.conf: 

===


[eaton]
 driver = bcmxcp_usb
 port = auto
 desc = "Eaton Powerware
9120 3000" 

 override.battery.charge.low = 91 

=== 

upsmon.conf:


=== 

NOTIFYCMD /sbin/upssched 

NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC


=== 

upssched.conf 

=== 

CMDSCRIPT /etc/nut/ups.sh
AT LOWBATT *
START-TIMER battery 3
AT ONLINE * CANCEL-TIMER battery

=== 

and, at
last, ups.sh works with ups and doing things. 

Everything is OK, upsc
shows UPS variables, among them - added battery.charge.low variable. But
during test of losing power LOWBATT state never comes - script ups.sh
doesn't starts. 

If I change LOWBATT to ONBATT in upsmon, upssched
everything works fine - script works. So, problem is in LOWBATT state.


So, the questions are: does this UPS has and works with low battery
states? 

Thanks 

-- 

Kindest regards, 

Dmitry Panoff
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20131125/1241f080/attachment.html>