[Nut-upsuser] sysOID for SMART-UPS 2200 RM XL

[Tom Parker]

Hello.   Just wanted to report this sysOID to you.  The UPSC output is
below.

Network UPS Tools - Generic SNMP UPS driver 0.70 (2.7.1)
kill: No such process
No matching MIB found for sysOID '.1.3.6.1.4.1.318.1.3.2.11'!
Please report it to NUT developers, with an 'upsc' output for your device.
Going back to the classic MIB detection method.
Detected SMART-UPS 2200 RM XL on host guyups2.gy.ls.cbn (mib: apcc 1.2)
[guyups2] Warning: excessive poll failures, limiting error reporting
[guyups2] Warning: excessive poll failures, limiting error reporting

[LIVE] guybackup:~ # upsc guyups2
ambient.1.humidity.alarm.high: 60.00
ambient.1.humidity.alarm.low: 30.00
ambient.1.temperature.alarm.high: 40.00
ambient.1.temperature.alarm.low: 10.00
ambient.humidity: 0.00
ambient.temperature: 25.0
battery.charge: 100.00
battery.charge.restart: 0
battery.current: 0.00
battery.current.total: 0.00
battery.date: 10/11/11
battery.packs: 0.00
battery.runtime: 1080.00
battery.runtime.low: 300
battery.voltage: 55.00
device.mfr: APC
device.model: SMART-UPS 2200 RM XL
device.serial: QS0411211473
device.type: ups
driver.name: snmp-ups
driver.parameter.mibs: auto
driver.parameter.pollfreq: 15
driver.parameter.pollinterval: 2
driver.parameter.port: guyups2.gy.ls.cbn
driver.parameter.snmp_version: v1
driver.version: 2.7.1
driver.version.data: apcc MIB 1.2
driver.version.internal: 0.70
input.frequency: 60.50
input.sensitivity: high
input.transfer.high: 132
input.transfer.low: 103
input.transfer.reason: noTransfer
input.voltage: 112.40
input.voltage.maximum: 113.70
input.voltage.minimum: 11.20
output.frequency: 60.50
output.voltage: 112.40
output.voltage.nominal: 115
ups.delay.shutdown: 180
ups.delay.start: 180
ups.firmware: 83.14.D
ups.id: guyups2
ups.load: 34.80
ups.mfr: APC
ups.mfr.date: 03/11/04
ups.model: SMART-UPS 2200 RM XL
ups.serial: QS0411211473
ups.status: OL
ups.temperature: 30.60
ups.test.date: 07/03/2014
ups.test.result: Ok