[Nut-upsuser] ups.load Smart-UPS 2200

Marcin Michta marcin.michta at gmail.com
Tue Aug 18 08:29:31 UTC 2015

OS Ubuntu 14.04.1 LTS, kernel 3.13.0-44-generic
NUT 2.7.1, installed from repo.
UPS APC Smart-UPS 2200

Hi all,

It looks like my UPS correctly work with NUT, but I don't see ups.load in

battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.runtime: 3960
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 54.5
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: Smart-UPS 2200
device.serial: XXXXXXXXXXXX
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.7.1
driver.version.data: APC HID 0.95
driver.version.internal: 0.38
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: UPS 08.8 / ID=18
ups.mfr: American Power Conversion
ups.mfr.date: 2014/04/24
ups.model: Smart-UPS 2200
ups.productid: 0003
ups.serial: AS1417242399
ups.status: OL
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.vendorid: 051d

upsc ups ups.load return:
Error: Variable not supported by UPS
So, this mean that "problem" is with UPS and nothing I can do?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20150818/b900ba86/attachment.html>

More information about the Nut-upsuser mailing list