[Nut-upsuser] Need help with Tripp Lite SMART1300LCDT NUT v2.7.3
clepple at gmail.com
Tue Aug 18 12:43:58 UTC 2015
On Aug 17, 2015, at 11:56 AM, Johnny Wong <e430benz98 at yahoo.com> wrote:
> > What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0)
> FreeBSD 10.2-RELEASE #0 r286738M
Okay, thanks. I think this is the first report of FreeBSD 10.2, so hopefully it is not an issue inherent in the OS. I will see if I can upgrade one of my machines to test with another UPS brand.
> the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free. if you need the ./configure I might have to look for their source on GitHub or something.
True, most people won't need to know the ./configure parameters. It looks like you found the driver path and the UPS name, so we're set for now. However, if you run across that part of the source code, it might be useful for later in case we need to rebuild a driver.
> /usr/local/libexec/nut/usbhid-ups -a upstl1300 -DDD
> Network UPS Tools - Generic HID driver 0.39 (2.7.3)
> USB communication driver 0.32
> 0.000000 debug level is '3'
> 0.006296 upsdrv_initups...
> 0.013551 Checking device (09AE/3016) (/dev/usb//dev/ugen0.5)
> 0.278818 - VendorID: 09ae
> 0.278835 - ProductID: 3016
> 0.278843 - Manufacturer: unknown
> 0.278852 - Product: unknown
> 0.278859 - Serial Number: unknown
> 0.278867 - Bus: /dev/usb
> 0.278876 Trying to match device
> 0.278925 Device matches
> 0.278937 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0)
Just for grins, can you try adding "usb_set_altinterface" to the ups.conf section for your UPS, and see if that changes this part of the log? (That is, after "[upstl1300]").
> 0.306126 HID descriptor, method 1: (9 bytes) => 09 21 11 01 00 01 22 6e 03
> 0.306148 HID descriptor, method 2: (9 bytes) => 09 21 11 01 00 01 22 6e 03
> 0.306156 HID descriptor length 878
> 5.279939 Unable to get Report descriptor: Input/output error
My other concern is that FreeBSD might not allow the method that we use to retrieve the Report Descriptor.
What do the following commands return (need to run them as root)?
usbconfig -u 0 -a 5 dump_device_desc
usbconfig -u 0 -a 5 dump_curr_config_desc
usbconfig -u 0 -a 5 do_request 0x81 0x06 0x2200 0 0x100
(I'm guessing on "-u 0 -a 5" based on .../dev/ugen0.5 -- that might change if the UPS USB cable is unplugged and re-inserted.)
> cat /var/etc/ups.conf
> driver = usbhid-ups
> port = auto
> pollfreq = 30
> productid = 3016
> Let me know what other information is required, I'll try my best to obtain it.
Thanks for sending ups.conf. That's all I can think of for now.
clepple at gmail
More information about the Nut-upsuser