[Nut-upsuser] APC BACK UPS 2200 model BZ2200BI-BR

[e430benz98 at yahoo.com]

I am not an expert on this matter but I can tell you I am having issues with Freebsd 10.2 with a Tripp Lite ups myself 

Hopefully a dev can look in to FreeBSD 10.2

Sent from my LG G3.

-----Original Message-----
From: Mario Lobo <mlobo at digiart.art.br>
To: nut-upsuser at lists.alioth.debian.org
Sent: Thu, 20 Aug 2015 3:50 PM
Subject: [Nut-upsuser] APC BACK UPS 2200 model BZ2200BI-BR

Hi;

I'm having some trouble to comunicate with my just bought (08/17/15)
Ups. According to SOLIS(8):

SUPPORTED HARDWARE

This driver has been tested with :

    Solis 1000 VA
    Solis 1500 VA
    Solis 2000 VA
    Solis 3000 VA
    Back-UPS BZ1200-BR
    Back-UPS BZ2200BI-BR

So solis is the one to go for.


Here is my scenario:

SW:  nut-2.7.3 (compiled from ports) 
OS:  FreeBSD 10.2-STABLE #2 r286923
UPS: APC BACK UPS 2200 model BZ2200BI-BR (usb interface)
     using a printer-like usb cable (bundled)

When I plug it in, here is what comes up:

ugen1.2: <APC BY SCHNEIDER ELECTRIC> at usbus1
umodem0: <APC BY SCHNEIDER ELECTRIC APC USB SERIAL CONVERTER., 
class 2/0, rev 2.00/1.00, addr 2> on usbus1 
umodem0: data interface 1, has no CM over data, has no break


[>]usbconfig list

ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=SAVE (0mA) 

ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0
md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) 

ugen2.1: <EHCI root HUB Intel>at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA) 

ugen1.2:<APC USB SERIAL CONVERTER. APC BY SCHNEIDER ELECTRIC> at
usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)


And here are the devices I get after pluging it in:

ttyU0
ttyU0.init
ttyU0.lock

cuaU0
cuaU0.init
cuaU0.lock

ugen1.2 (ugen1.2 -> usb/1.2.0)

(no umodem0 device shows)


** ups.conf

[lobos]
  driver = solis
  port = /dev/ttyU0 (or cuaU0, or ugen1.2)


*** RESULTS

** ugen1.2

[>]/usr/local/libexec/nut/solis -D -a lobos -u root
Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3)
   0.000000     debug level is '1'
   0.001551     tcgetattr(/dev/ugen1.2): Inappropriate ioctl for device

** ttyU0

[>]/usr/local/libexec/nut/solis -D -a lobos -u root
Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3)
   0.000000     debug level is '1'
  21.249301     Solis not detected! aborting ...

** cuaU0

[>]/usr/local/libexec/nut/solis -D -a lobos -u root
Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3)
   0.000000     debug level is '1'
  21.065536     Solis not detected! aborting ...


using 'upsdrvctl -t -u root start lobos' yields the same results.


On windows it works with the software that I downloaded for it
but the server is FreeBSD. Windows is just the desktop I use for
occasional audio production.


Would anyone have any pointers of what else I can try to make this
work?

Thanks for any suggestions. 

-- 
Mario Lobo
http://www.mallavoodoo.com.br
FreeBSD since 2.2.8 [not Pro-Audio.... YET!!]

"UNIX was not designed to stop you from doing stupid things, 
because that would also stop you from doing clever things."

_______________________________________________
Nut-upsuser mailing list
Nut-upsuser at lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20150820/0e944e38/attachment.html>