[Nut-upsuser] Need help with Tripp Lite SMART1300LCDT NUT v2.7.3

[Johnny Wong]

I loaded up FreedBSD 10.2 on a really old C2D system, but I can't find a Ethernet driver for it... so I am unable to actually load NUT on it.  I will have to work more on it this weekend 
Sent from Mail for Windows 10



From: Charles Lepple
Sent: Monday, August 24, 2015 5:53 PM
To: Johnny Wong
Cc: nut-upsuser at lists.alioth.debian.org
Subject: Re: [Nut-upsuser] Need help with Tripp Lite SMART1300LCDT NUT v2.7.3


On Aug 19, 2015, at 9:00 AM, Charles Lepple <clepple at gmail.com> wrote:
> 
> On Aug 19, 2015, at 12:08 AM, Johnny Wong <e430benz98 at yahoo.com> wrote:
>> 
>> Here are couple of things I tried.
>> 
>> 1)      Changed the USB cable.  Same problem
>> 2)      I put an old CyberPower CP550SL w/USB&SERIAL and it recognize it right away via the USB port
>> I don’t know if that will give you any insight or eliminate certain things with the Tripp Lite SMART1300LCDT or not.
>> 
> 
> Thanks for testing the USB cable and the other UPS - those are good data points.
> 
> I am surprised that I did not run across this thread earlier: http://article.gmane.org/gmane.comp.monitoring.nut.user/8700 (SMART1500RM2UN disconnects every 40-45 seconds)
> 
> I also did not see any changes in the FreeBSD source code that specifically mention the USB alt setting (although they have an unbelievable number of different ways to spell that). I will still try to set up a FreeBSD 10.2 box at some point for system testing.

I set up a FreeBSD 10.2 system, and tested a USB MGE Evolution against NUT v2.7.3. No USB issues so far, and it's been running since this morning.

> 
> You might also try booting from a Linux live CD and using their version of NUT to see if the SMART1300LCDT still disconnects. Tripp Lite has said that they only support certain distributions of Linux (I don't recall which, but I would assume Red Hat is among them), so if you can prove that there are problems with a supported Linux distribution, you might be able to get warranty service.

Curious to hear how this goes.

-- 
Charles Lepple
clepple at gmail







---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20150824/f646ca45/attachment-0001.html>