[Nut-upsuser] UPS/NUT with openSUSE 13.1

[Rob Groner]

I didn't think to look for a log (attached), but now looking in it, I don't see anything more than I already thought I knew.  It's as cryptic as configure itself.  

It does reference the line in the configure where the test for USB failed, but I'd already been looking in there.  I can't make sense of the lines above that set "nut_have_libusb", as far as what they're looking for.  Clearly somehow, that is supposed to be set to "yes".


Rob Groner
Software Engineer Level II

RTD Embedded Technologies, Inc.
ISO 9001 and AS9100 Certified
Ph: +1 814-234-8087
www.rtd.com

-----Original Message-----
From: Charles Lepple [mailto:clepple at gmail.com] 
Sent: Friday, September 18, 2015 7:06 PM
To: Rob Groner <rgroner at RTD.com>
Cc: Roger Price <roger at rogerprice.org>; nut-upsuser Mailing List <nut-upsuser at lists.alioth.debian.org>
Subject: Re: [Nut-upsuser] UPS/NUT with openSUSE 13.1

On Sep 18, 2015, at 2:45 PM, Rob Groner <rgroner at RTD.com> wrote:
> 
> Well, I've spent a couple hours on this, unable to figure it out.  I removed the libusb-compat-devel package using zypper.  And I've downloaded, built, and installed libusb from sourceforge.  But trying to configure nut now I get "USB drivers requested, but libusb not found", no matter what I put for --with-usb-libs.  Continuing to flog away at it...

What's the error message? It might be hidden in config.log, but if you send that, please gzip it first.

-- 
Charles Lepple
clepple at gmail



-------------- next part --------------
A non-text attachment was scrubbed...
Name: config_log.gz
Type: application/x-gzip
Size: 11385 bytes
Desc: config_log.gz
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20150921/9cb760b7/attachment.bin>