[Nut-upsuser] FreeBSD backed with a PR1500LCDRT2U

[Louis G.]

Charles,

For what it is worth, I also have a Cyber Power CP900AVR laying around that I can test with. 

Joe Gzesh 
Sent from Zimbra Open Source Mail Server. Hosted at my House. 
Ask me how to set up your own Zimbra server.

----- On Sep 25, 2015, at 7:34 AM, Joseph Gzesh louis at frentzgzesh.info wrote:

>> 
>>> usbconfig -u 4 -a 2 dump_curr_config_desc
>> 
>> Here is output of the command. Thank you for your help with this.
>> 
>> ugen4.2: <product 0x0601 CyberPower Systems> at usbus4, cfg=0 md=HOST spd=LOW
>> (1.5Mbps) pwr=ON (50mA)
>> 
> [...]
>> bLength = 0x09
>> bDescriptorType = 0x21
>> bDescriptorSubType = 0x10
>>> RAW dump:
>>> 0x00 | 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, 0x90,
>>> 0x08 | 0x02
>>
>> This looks reasonable.
>>
>> What about this?
>>
>> usbconfig -u 4 -a 2 do_request 0x81 0x06 0x2200 0 0x100
>>
>> One thing I noticed about the report descriptor that NUT returned: it has extra
>> zero bytes.
>>
>> For instance, these lines:
>>
>> 0.157417 Report Descriptor: (656 bytes) => 05 00 84 00 09 00 04 00 a1 00 01 00
>> 09 00
>> 0.157431 24 00 a1 00 00 00 85 00 01 00 09 00 fe 00 75 00 08 00 95 00 01 00 15 00
>> 00
>>
>> would parse fairly normally if they read as follows:
>>
>> 0.157417 Report Descriptor: (656 bytes) => 05 84 09 04 a1 01 09
>> 0.157431 24 a1 00 85 01 09 fe 75 08 95 01 15 00
> 
> Here is the output from that command. Thank you for your help.
> 
> usbconfig -u 4 -a 2 do_request 0x81 0x06 0x2200 0 0x100
> REQUEST = <0x05 0x84 0x09 0x04 0xa1 0x01 0x09 0x24 0xa1 0x00 0x85 0x01 0x09 0xfe
> 0x75 0x08 0x95 0x01 0x15 0x00 0x26 0xff 0x00 0xb1 0x22 0x85 0x02 0x09 0xff 0xb1
> 0x22 0x85 0x03 0x05 0x85 0x09 0x8f 0xb1 0x22 0x85 0x04 0x09 0x89 0xb1 0x22 0x85
> 0x05 0x09 0x8b 0xb1 0x22 0x85 0x06 0x09 0x2c 0xb1 0x22 0x85 0x07 0x75 0x08 0x95
> 0x05 0x25 0x64 0x09 0x83 0x09 0x8d 0x09 0x8e 0x09 0x8c 0x09 0x67 0xb1 0x22 0x95
> 0x01 0x25 0x41 0x15 0x14 0x09 0x29 0xb1 0x22 0x25 0x64 0x15 0x00 0x85 0x08 0x75
> 0x08 0x65 0x00 0x09 0x66 0x81 0x22 0x09 0x66 0xb1 0xa2 0x09 0x68 0x75 0x10 0x27
> 0xff 0xff 0x00 0x00 0x66 0x01 0x10 0x81 0x22 0x09 0x68 0xb1 0xa2 0x09 0x2a 0x26
> 0x58 0x02 0x81 0x22 0x09 0x2a 0xb1 0xa2 0x85 0x09 0x75 0x10 0x27 0xff 0xff 0x00
> 0x00 0x05 0x84 0x09 0x40 0x67 0x21 0xd1 0xf0 0x00 0x55 0x06 0xb1 0x22 0x85 0x0a
> 0x09 0x30 0xb1 0xa2 0x65 0x00 0x55 0x00 0x09 0x02 0xa1 0x02 0x85 0x0b 0x75 0x01
> 0x95 0x06 0x25 0x01 0x05 0x85 0x09 0xd0 0x09 0x44 0x09 0x45 0x09 0x42 0x09 0x46
> 0x09 0x43 0x81 0x22 0x09 0xd0
>  0x09 0x44 0x09 0x45 0x09 0x42 0x09 0x46 0x09 0x43 0xb1 0xa2 0x75 0x02 0x95 0x01
>  0x81 0x01 0xb1 0x01 0xc0 0x85 0x0c 0x05 0x84 0x09 0x5a 0x75 0x08 0x15 0x01 0x25
>  0x03 0xb1 0xa2 0x85 0x0d 0x09 0xfd 0x15 0x00 0x26 0xff 0x00 0xb1 0x22 0xc0 0x05
>  0x84 0x09 0x1a 0xa1 0x00 0x85 0x0e 0x05 0x84 0x09 0x40
>  0x75><$u&""""","u%dg"%A)"%duef"fhu'f"h*&X"*u'@g!U"0eUu%DEBFC"DEBFCuZu%&"@u>
> 
> Joe Gzesh
> Sent from Zimbra Open Source Mail Server. Hosted at my House.
> Ask me how to set up your own Zimbra server.
> 
> ----- Original Message -----
> From: "Charles Lepple" <clepple at gmail.com>
> To: "Joseph Gzesh" <louis at frentzgzesh.info>
> Cc: nut-upsuser at lists.alioth.debian.org
> Sent: Thursday, September 24, 2015 10:59:12 PM
> Subject: Re: [Nut-upsuser] FreeBSD backed with a PR1500LCDRT2U
> 
> On Sep 24, 2015, at 10:28 AM, Louis G. <louis at frentzgzesh.info> wrote:
>> 
>>> usbconfig -u 4 -a 2 dump_curr_config_desc
>> 
>> Here is output of the command. Thank you for your help with this.
>> 
>> ugen4.2: <product 0x0601 CyberPower Systems> at usbus4, cfg=0 md=HOST spd=LOW
>> (1.5Mbps) pwr=ON (50mA)
>> 
> [...]
>> bLength = 0x09
>> bDescriptorType = 0x21
>> bDescriptorSubType = 0x10
>> RAW dump:
>> 0x00 | 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, 0x90,
>> 0x08 | 0x02
> 
> This looks reasonable.
> 
> What about this?
> 
> usbconfig -u 4 -a 2 do_request 0x81 0x06 0x2200 0 0x100
> 
> One thing I noticed about the report descriptor that NUT returned: it has extra
> zero bytes.
> 
> For instance, these lines:
> 
> 0.157417 Report Descriptor: (656 bytes) => 05 00 84 00 09 00 04 00 a1 00 01 00
> 09 00
> 0.157431 24 00 a1 00 00 00 85 00 01 00 09 00 fe 00 75 00 08 00 95 00 01 00 15 00
> 00
> 
> would parse fairly normally if they read as follows:
> 
> 0.157417 Report Descriptor: (656 bytes) => 05 84 09 04 a1 01 09
> 0.157431 24 a1 00 85 01 09 fe 75 08 95 01 15 00
> 
> --
> Charles Lepple
> clepple at gmail
> 
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser