[Nut-upsuser] Problem installing NUT on 16.04
Jack McGee
jack at greendesk.net
Sat Dec 3 16:55:16 UTC 2016
On 12/03/2016 10:35 AM, Charles Lepple wrote:
> On Dec 3, 2016, at 11:16 AM, Jack McGee <jack at greendesk.net> wrote:
>> Dec 3 08:38:16 amethi upsd[18234]: not listening on ::1 port 3493
>> Dec 3 08:38:16 amethi upsd[18234]: listening on 127.0.0.1 port 3493
>> Dec 3 08:38:16 amethi upsd[18234]: no listening interface available
> I can't say I fully understand the logic behind the IPv6 code, but the first line indicates a problem binding to the IPv6 localhost address. The "LISTEN 127.0.0.1 3493" line in upsd.conf is sufficient for local control and monitoring, and you can remove "LISTEN ::1 3493".
OK, did that restarted services and:
mythuser at amethi:/etc/nut$ upscmd -l CyberUPS1
Instant commands supported on UPS [CyberUPS1]:
beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
beeper.off - Obsolete (use beeper.disable or beeper.mute)
beeper.on - Obsolete (use beeper.enable)
load.off - Turn off the load immediately
load.off.delay - Turn off the load with a delay (seconds)
load.on - Turn on the load immediately
load.on.delay - Turn on the load with a delay (seconds)
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test
so this is progress. Thanks! Anything else to check to know it is
working as it should?
My next step will be to point NUT client on another machine to this one.
They are both plugged into this UPS.
More information about the Nut-upsuser
mailing list