[Nut-upsuser] Not getting nut to work with Eaton 5115

[Magnus Karlsson]

Following the instructions a following site I can not get nut to work with
my UPS.

http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups

Hope that you can find out what is wrong by the provided info in the email

Best Regards,
Magnus Karlsson


# lsusb -s 001:005 -v

Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x06da Phoenixtec Power Co., Ltd
  idProduct          0x0002 UPS
  bcdDevice            1.00
  iManufacturer           4 Powerware
  iProduct               24 Powerware UPS
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               60mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              20
Device Status:     0x0000
  (Bus Powered)


************************************
/etc/udev/rules.d/90-nut-ups.rules

# Eaton 5115
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="06da",
ATTR{idProduct}=="0002", MODE="0660", GROUP="nut"
************************************


************************************
Issuing command
root at laptux:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.6.4
Network UPS Tools - Generic HID driver 0.37 (2.6.4)
USB communication driver 0.32
This Liebert device (06da:0002) is not (or perhaps not yet) supported
by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
this does not fix the problem, try running the driver with the
'-x productid=0002' option. Please report your results to the NUT user's
mailing list <nut-upsuser at lists.alioth.debian.org>.

No matching HID UPS found
Driver failed to start (exit status=1)
*******************************************



**********************************************
/etc/nut/nut.conf


MODE=standalone

***********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160122/66c2ded0/attachment.html>