[Nut-upsuser] cyberpower ups need to manully turn on the switch

[Min Wang]

Hi

I have CP825AVR-G UPS.  sometimes the UPS is shutdown due to whatever
reason.

But the annoying thing is even if the electrical power is back, that UPS
will continue to beep, and I have to manually turn on the switch button in
order for it to supply the load/power.

I am wondering if there is any setting in the UPS I need to config? I just
want the UPS to supply the power when the main electrical power is back.

here is the output of the upsc command for that UPS.

#   upsc cyberpower
battery.charge: 77
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 519
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 8.5
battery.voltage.nominal: 12
device.mfr: CPS
device.model: CP825AVR-G
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.vendorid: 0764
driver.version: 2.6.5
driver.version.data: CyberPower HID 0.3
driver.version.internal: 0.37
input.transfer.high: 140
input.transfer.low: 90
input.voltage: 121.0
input.voltage.nominal: 120
output.voltage: 121.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 40
ups.mfr: CPS
ups.model: CP825AVR-G
ups.productid: 0501
ups.realpower.nominal: 450
ups.status: OL CHRG
ups.timer.shutdown: -1
ups.timer.start: 0
ups.vendorid: 0764
-- 


thanks

min
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160507/b71f1e1d/attachment.html>