[Nut-upsuser] cyberpower ups need to manully turn on the switch

Min Wang mingewang at gmail.com
Sun May 8 01:35:40 UTC 2016


I am using centos 6.3, and nut-2.6.5-2.el6.x86_64.

could you explain why not sending "a delayed command to the UPS to turn it
off" may cause that issue?

I saw:

ups.delay.shutdown: 20
ups.delay.start: 30

is it something related?



On Sat, May 7, 2016 at 3:44 PM, Roger Price <roger at rogerprice.org> wrote:

> On Sat, 7 May 2016, Min Wang wrote:
> Hi  I have CP825AVR-G UPS.  sometimes the UPS is shutdown due to whatever
>> reason.
>> But the annoying thing is even if the electrical power is back, that UPS
>> will continue to beep, and I have to manually turn on the switch button in
>> order for it to supply the load/power.
>> I am wondering if there is any setting in the UPS I need to config? I
>> just want the UPS to supply the power when the main electrical power is
>> back.
> It sounds as if you are not sending a delayed command to the UPS to turn
> it off.  Are you using a GNU/Linux distribution with systemd?  Which
> version of nut are you using? Do you have
> /usr/lib/systemd/system-shutdown/nutshutdown enabled?
> Roger
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160507/0c58c0fb/attachment.html>

More information about the Nut-upsuser mailing list