[Nut-upsuser] Low Battery event not occurring
roger at rogerprice.org
Sat May 14 10:01:44 UTC 2016
On Fri, 13 May 2016, Kamran Khan wrote:
> I have a TrippLite SMART2200RM2UN UPS. I have installed and configured
> NUT as instructed on the website, and am able to monitor the status of
> the UPS without much problem. The only problem I am seeing is that I
> cannot get the machine to actually send a Low Battery ( LB ) signal.
> When I run "upsc myups at localhost", the "battery.charge.low" is "10". My
> current "battery.charge" is "6". However, when I type "upsc
> myups at localhost ups.status", it only shows OB and DISCHRG, not LB.
> If I understand the NUT process correctly, it looks for this LB status
> in order to create the POWERDOWNFLAG. "In upsmon.conf, add a
> POWERDOWNFLAG directive with a filename. upsmon will create this file
> when the UPS needs to be powered off during a power failure when low
> battery is reached."
What does command
sudo grep -v -E "#.*$|^[[:space:]]*$" /etc/ups/upsmon.conf
More information about the Nut-upsuser