[Nut-upsuser] Powerwalker VI 2200VA LCD

[Lars de Bruin]

The UPS seems to disconnect totally, i need to physically disconnect the cable to get the UPS connected again.
A reboot is not enough.
Also tried 2 different cables, the one i use now is shielded + 2 ferrite chokes to limit interference.


But i want to use NUT since i dont have enough resources to run X..




-------- Original Message --------
Subject: Re: [Nut-upsuser] Powerwalker VI 2200VA LCD
Local Time: October 10, 2016 12:23 AM
UTC Time: October 9, 2016 10:23 PM
From: hyouko at gmail.com
To: Lars de Bruin <lars at larsdebruin.net>
nut-upsuser <nut-upsuser at lists.alioth.debian.org>

2016-10-03 14:56 GMT+02:00 Lars de Bruin <lars at larsdebruin.net>:
> Hi,
>
> The UPS is now connected via HID-USB, but seems to randomly disconnect.
> Sometimes after a few hours, other times days...
> Any suggestions?

A log would help, but, in general, if the device disconnects and,
after a short time, the connection is restored, it could be a cable
problem, or the UPS not keeping the pace needed to update all the
necessary data.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161010/f77e3a67/attachment.html>