[Nut-upsuser] Data Stale at random intervals

[Daniel Shields]

Have done more Googling and searching around the system.  Found that /lib/udev/rules.d/52-nut-usbups.rules has been changed to 62 by others and also in Sid (2.7.4) so gave that a shot.  Will post back with results.


________________________________
From: Daniel Shields <grungelizard9 at hotmail.com>
Sent: Monday, October 10, 2016 10:51 PM
To: nut-upsuser at lists. alioth. debian. org
Subject: Re: Data Stale at random intervals


Also, I have replaced the cable and have tried to install on Raspbian with the same issue.  Seems I may be missing something in the configuration, but haven't been able to find anything yet.


On October 10, 2016, at 9:39 PM, Daniel Shields <grungelizard9 at hotmail.com> wrote:


Hello All,


     Been at this for a few weeks, so figured I'd reach out.  I was previously running Debian Wheezy Nut Version 2.6.4 with no issues for over 6 months on the same hardware.  This issue started when I upgraded to Jessie, so just trying to get everything happy again.


System is running "Linux golgotha.tklapp.com 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux"


Nut Version:  ii  nut                                     2.7.2-4                  all                      network UPS tools - metapackage


Installed via apt-get


Monitoring:


CyberPower 1500PFCLCD UPS

Communication: USB, Serial

I'm able to start the NUT service on my system and it runs for a couple of hours up to just under 24 hours.  I have scrubbed the logs and have not been able to pinpoint the exact issue.

I have attached the syslog and debug logs.  Any help is greatly appreciated.  Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161012/634f2f2a/attachment.html>