[Nut-upsuser] HP R1500 G2 USB on Ubuntu

[me at electronico.nc]

Hello,

Control HP R1500 G2 with nut via USB.

Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64)
nut V2.7.1 installed from repository

/etc/nut/ups.conf
[HPR1500]
driver=usbhid-ups
port=auto

After dealing hours with this, hope this will help some :

rename udev rule to higher priority and move it to its right location, 
reload udev rules
mv /lib/udev/rules.d/52-nut-usbups.rules 
/lib/udev/rules.d/62-nut-usbups.rules
cp /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
udevadm control --reload-rules
udevadm trigger
reboot server to be sure everything is OK

Nicolas

upsc HPR1500
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 20
battery.charge.warning: 20
battery.runtime: 24171
battery.temperature: 46.0
battery.type: PbAc
battery.voltage: 41.0
battery.voltage.nominal: 36.0
device.mfr: Hewlett-Packard
device.model: HP R1500 G2 UPS
device.part: 416830-002
device.serial: 3Cxxxxxxxx (not usefull)
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.7.1
driver.version.data: TrippLite HID 0.81
driver.version.internal: 0.38
input.frequency: 50.0
input.transfer.high: 266.0
input.transfer.low: 194.0
input.voltage: 234.0
input.voltage.nominal: 230
output.current: 0.00
output.frequency: 0.0
output.frequency.nominal: 50
output.voltage: 0.0
output.voltage.nominal: 230
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 768
ups.load: 0
ups.load.nominal: 80
ups.mfr: Hewlett-Packard
ups.model: HP R1500 G2 UPS
ups.power: 0.0
ups.power.nominal: 1500
ups.productid: 1fe0
ups.serial: 3C80341001
ups.status: OL CHRG
ups.test.result: No test initiated
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.timer.start: -1
ups.vendorid: 03f0