[Nut-upsuser] HP R1500 G2 USB on Ubuntu

[Nicolas]

On 12/04/2017 19:34, Jon Bendtsen wrote:
> On 12/04/17 09.23, me at electronico.nc wrote:
>> Hello,
>>
>> Control HP R1500 G2 with nut via USB.
>>
>> Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64)
>> nut V2.7.1 installed from repository
>>
>> /etc/nut/ups.conf
>> [HPR1500]
>> driver=usbhid-ups
>> port=auto
>>
>> After dealing hours with this, hope this will help some :
>>
>> rename udev rule to higher priority and move it to its right 
>> location, reload
>> udev rules
>> mv /lib/udev/rules.d/52-nut-usbups.rules 
>> /lib/udev/rules.d/62-nut-usbups.rules
>> cp /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
>> udevadm control --reload-rules
>> udevadm trigger
>> reboot server to be sure everything is OK
>
> what was the issue before that?
Unable to connect to UPS via upsc
>
> [cuuut]
>
>> ups.serial: 3C80341001
>
> if you put that in the ups.conf definition, would it have made it 
> detect it without the issues above?
I didn't know the serial as I couldn't connect to UPS via upsc
>
>
> [HPR1500]
> driver=usbhid-ups
> port=auto
> serial = 3C80341001
>
>
>
> JonB