[Nut-upsuser] Eaton PW9130 1500VA-T with netxml-ups driver

[Makoto Isao]

Hello,
I have some questions about netxml-ups driver. 
My UPS: Eaton PW9130 1500VA-T with Network Management Card. 
OS: Fedora 24
NUT 2.7.4 (from fedoraproject repo)
Driver: netxml-ups.
Results of upsc:
ambient.humidity.high: 90
ambient.humidity.low: 5
ambient.temperature.high: 40
ambient.temperature.low: 5
battery.charge: 100
battery.charge.low: 20
battery.charge.restart: 0
battery.runtime: 69012
battery.runtime.low: 180
battery.voltage: 52
device.contact: Computer Room Manager
device.location: Computer Room
device.mfr: Eaton
device.model: PW9130 1500VA-T 
device.serial: PL062A6342 
device.type: ups
driver.name: netxml-ups
driver.parameter.pollinterval: 2
driver.parameter.port:  http://192.168.0.1:80
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: MGEXML/0.25
driver.version.internal: 0.40
input.bypass.frequency: 49
input.bypass.voltage: 226
input.frequency: 49
input.frequency.nominal: 50
input.transfer.boost.high: 195
input.transfer.boost.low: 195
input.transfer.high: 276
input.transfer.low: 120
input.transfer.trim.high: 253
input.transfer.trim.low: 253
input.voltage: 226
input.voltage.nominal: 230
outlet.1.battery.charge.low: 0
outlet.1.delay.shutdown: 120
outlet.1.delay.start: 0
outlet.1.desc: Group1
outlet.1.status: on
outlet.1.switchable: yes
outlet.1.timer.shutdown: -1
outlet.1.timer.start: -1
outlet.2.battery.charge.low: 0
outlet.2.delay.shutdown: 120
outlet.2.delay.start: 0
outlet.2.desc: Group2
outlet.2.status: on
outlet.2.switchable: yes
outlet.2.timer.shutdown: -1
outlet.2.timer.start: -1
outlet.desc: Master
outlet.switchable: no
output.current: 0
output.frequency: 49
output.frequency.nominal: 50
output.voltage: 229
output.voltage.nominal: 230
ups.beeper.status: disabled
ups.date: 2017/06/13
ups.delay.shutdown: 120
ups.firmware: 1.30
ups.firmware.aux: Network Management Card/Mosaic 4M 16M 55/JI
ups.load: 0
ups.mfr: Eaton
ups.model: PW9130 1500VA-T 
ups.power: 0
ups.power.nominal: 1500
ups.realpower: 0
ups.realpower.nominal: 1350
ups.serial: PL062A6342 
ups.status: OL CHRG
ups.temperature: 24
ups.test.result: done and passed
ups.time: 20:02:29
ups.timer.shutdown: -1
ups.timer.start: -1

A. 
When UPS is on battery, ups.status is OB DISCH. If battery.charge becomes equal battery.charge.low, ups.status changes to OB DISCH FSD. LB state not appear before FSD. Server shutdown. This is good.
But if battery.runtime becomes equal battery.runtime.low, ups.status not changes and stay the same - OB DISCH. Is it bug?
B.
Does the netxml-ups driver support any UPS management or available UPS monitoring only?
Result of upscmd –l is empty. upsdrvctl shutdown - won’t shutdown ups
__________________
Kind Regards, 
Viacheslav


-- 
Makoto Isao
----------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170707/d5ffea60/attachment.html>