[Nut-upsuser] Using NUT to signal an appliance

Matthew.Koundakjian at Engility.com Matthew.Koundakjian at Engility.com
Fri May 11 19:09:38 BST 2018

Hi ....

I have a disk box from ACNC (Jetstor 416is) that has an UPS port.  The manual describes an UPS port: "2. Uninterrupted Power Supply (UPS) Port (APC Smart UPS only) The subsystem may come with an optional UPS port allowing you to connect APC Smart UPS device. Connect the cable from the UPS device to the UPS port located at the rear of the subsystem. This will automatically allow the subsystem to use the functions and features of the UPS."

Is there a known way to *send* APC smart signaling to an external device from NUT?

What about dumb APC signaling?

Thank you!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20180511/48c58800/attachment.html>

More information about the Nut-upsuser mailing list