[Nut-upsuser] This Liebert device (10af:0002) is not supported. Newer Lithium PSI5 device.

Lucas Keipper lucask at lmkconsulting.net
Fri Dec 11 20:01:15 GMT 2020


I added the 'productid = 0002' line to my ups.conf and get this new output:

sudo /sbin/upsdrvctl start

Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
Can't claim USB device [10af:0002]: could not detach kernel driver from
interface 0: Operation not permitted
Driver failed to start (exit status=1)

Anything else I can try?


—
Lucas Keipper
IT Consultant & Owner
LMK Consulting
(980) 621-6728
lmkconsulting.net <http://www.lmkconsulting.net>


On Thu, Dec 10, 2020 at 6:03 PM Joe Reid <jreid at vnet.net> wrote:

> [networkups]
>          driver = usbhid-ups
>          port = auto
>          desc = "Network Closet UPS"
>          productid = 0002
>
> is what's in my ups.conf
>
>
> On 12/10/2020 2:44 PM, Lucas Keipper wrote:
> > Hi there. I have a new Liebert Vertiv PSI5 Lithium UPS connected to my
> > Ubuntu 18.04 box via USB that I am trying to configure with NUT. This
> > device is not on the HCL, but should be pretty similar to the  PSI
> > 1440 USB which uses the usbhid-ups driver. (or I'm completely wrong,
> > but it's a similar product family...)
> >
> > I know it's not officially supported, but if someone would like to use
> > me as the guinea pig for the correct driver settings then I'm open to
> > some additional testing.
> >
> > ups.conf entry:
> > [VertivPSI5-lithium]
> >    driver = usbhid-ups
> >    port = auto
> >
> > "sudo /sbin/upsdrvctl start" outputs the below:
> >
> > Network UPS Tools - UPS driver controller 2.7.4
> > Network UPS Tools - Generic HID driver 0.41 (2.7.4)
> > USB communication driver 0.33
> > This Liebert device (10af:0002) is not (or perhaps not yet) supported
> > by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
> > this does not fix the problem, try running the driver with the
> > '-x productid=0002' option. Please report your results to the NUT user's
> > mailing list <nut-upsuser at lists.alioth.debian.org
> > <mailto:nut-upsuser at lists.alioth.debian.org>>.
> >
> > How do I "run the driver with -x ..."? I've tried adding it to the end
> > of the command line and adding it to the ups.conf file, but neither work.
> >
> > I have updated the system via apt.
> >
> > NUT version is: 2.7.4-5.1ubuntu2
> >
> > Thanks!
> >
> > —
> > Lucas Keipper
> > IT Consultant & Owner
> > LMK Consulting
> > (980) 621-6728
> > lmkconsulting.net <http://www.lmkconsulting.net>
> >
> > _______________________________________________
> > Nut-upsuser mailing list
> > Nut-upsuser at alioth-lists.debian.net
> > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>
>
> --
> joe
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20201211/49c72ab3/attachment.html>


More information about the Nut-upsuser mailing list