[Nut-upsuser] Hardware compatability report: Eaton Ellipse ECO 1600

[Roger Price]

Here is a Compatibility Report for the Eaton Ellipse ECO 1600 UPS.  Roger

battery.charge: 100
battery.charge.low: 20
battery.runtime: 1575
battery.type: PbAc
device.mfr: EATON
device.model: Ellipse ECO 1600
device.serial: 000000000
device.type: ups
driver.name: usbhid-ups
driver.parameter.lowbatt: 37
driver.parameter.offdelay: 30
driver.parameter.ondelay: 40
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.parameter.vendorid: 0463
driver.version: 2.7.4
driver.version.data: MGE HID 1.39
driver.version.internal: 0.41
input.transfer.high: 284
input.transfer.low: 161
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 2
outlet.1.status: on
outlet.1.switchable: no
outlet.2.desc: PowerShare Outlet 2
outlet.2.id: 3
outlet.2.status: on
outlet.2.switchable: no
outlet.desc: Main Outlet
outlet.id: 1
outlet.power: 25
outlet.switchable: no
output.frequency.nominal: 50
output.voltage: 230.0
output.voltage.nominal: 230
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 01
ups.load: 19
ups.mfr: EATON
ups.model: Ellipse ECO 1600
ups.power.nominal: 1600
ups.productid: ffff
ups.serial: 000000000
ups.status: OL
ups.timer.shutdown: 0
ups.timer.start: 0
ups.vendorid: 0463

upsrw reports:

[battery.charge.low]
Remaining battery level when UPS switches to LB (percent)
Type: STRING
Maximum length: 5
Value: 20

[input.transfer.high]
High voltage transfer point (V)
Type: STRING
Maximum length: 5
Value: 284

[input.transfer.low]
Low voltage transfer point (V)
Type: STRING
Maximum length: 5
Value: 161

[outlet.1.desc]
Outlet description
Type: STRING
Maximum length: 20
Value: PowerShare Outlet 1

[outlet.2.desc]
Outlet description
Type: STRING
Maximum length: 20
Value: PowerShare Outlet 2

[outlet.2.switchable]
Outlet switch ability
Type: STRING
Maximum length: 3
Value: no

[outlet.desc]
Outlet description
Type: STRING
Maximum length: 20
Value: Main Outlet

[outlet.power]
Description unavailable
Type: ENUM
Option: "10"
Option: "25" SELECTED
Option: "60"

[output.voltage.nominal]
Nominal output voltage (V)
Type: ENUM
Option: "220"
Option: "230" SELECTED
Option: "240"

[ups.delay.shutdown]
Interval to wait after shutdown with delay command (seconds)
Type: STRING
Maximum length: 10
Value: 20

[ups.delay.start]
Interval to wait before (re)starting the load (seconds)
Type: STRING
Maximum length: 10
Value: 30

upscmd -l reports:

beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
beeper.off - Obsolete (use beeper.disable or beeper.mute)
beeper.on - Obsolete (use beeper.enable)
load.off - Turn off the load immediately
load.off.delay - Turn off the load with a delay (seconds)
load.on - Turn on the load immediately
load.on.delay - Turn on the load with a delay (seconds)
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress