[Nut-upsuser] reset "replace battery" flag

[Manuel Wolfshant]

On 9/25/20 1:36 PM, Lionel Élie Mamane wrote:
>
> On Thu, Sep 24, 2020 at 06:51:23PM +0300, Manuel Wolfshant wrote:
>> On 9/21/20 9:47 PM, Lionel Élie Mamane wrote:
>>> We have a HP R/T 3000 G4 UPS; according to the data returned by the
>>> usbhid-ups driver, it seems to be a "badge engineered" Eaton 5PX
>>> UPS LI R 3000.
>>> We have a stubborn "Replace Battery" alarm that stays (...):
>>> The panel doesn't show any battery-related alarm.
>>> Anybody has a clue how I should proceed or debug the issue?
>> try to run the driver in debug mode so that we can see what data is actually
>> sent by the UPS
>> #usbhid-ups -DDDD -u root -a $YourUpsName
>> where $YourUpsName is the one you used in /etc/ups/ups.conf
>> After a few seconds the output will start to repeat so ctrl-c and examine
>> whatever was collected. and maybe zip it and send it to the list.
> I attach the output. I looked for "replace" and "battery" in there,
> and nothing obviously understandable to me in there; that is too raw
> data, not sure what it means.
>
> If anybody can make sense of it, thanks in advance!
>
> Lionel

Can you please send the output of upsc ? I am trying to match the data 
reported by the usbhid-ups driver with what nut believes it sees. I have 
a feeling that some flag is misinterpreted

wolfy